Unlimited Resources Corporation (URC) currently has a complete whole tire down to 1” minus rubber shredding or processing system for sale at a very attractive price. This Granutech/Saturn waste tire recycling system is basically the same as new. This system offers without a doubt one of the best buys in the marketplace today. This tire shredding system comes with all the equipment needed to make it a complete system. You won’t find a better system available in the industry today and you most definitely won’t find one at this tremendous price. We ask you to take the time to check into this offering because we only have one of these systems that we will ever be offering at this attractive a price. Check this system out before it’s too late!!
Complete Granutech/Saturn Whole Tire Recycling System
This system takes “Whole Tires” down to 1” minus size rubber
1. Custom built whole tire in-feed conveyor (new) 48” wide X 30’ long flat slider belt with sides
2. Custom built in-feed hopper for shredder (new) for doing a split chamber machine
3. Completely Refurbished Granutech/Saturn Model 62 X 40HT shredder with high out-put SAE hydraulic motor /furnished with 2”wide X 2 hook knives in the primary shredding chamber and 1 3/8” X 12 hook knives in the secondary shredding chamber
4. 300 H.P. Hydraulic Power Pac (new) Unit has (2) 150 H.P. Electric motors driving (2) Dennison Hydraulic pumps
5. Custom built stand (new) for shredder with catwalks(new)
6. Custom built shredder out-feed conveyor (new) 36” wide X 26’ long troughed slider belt
7. Custom built 42” X 7’6” Rotary disc screen classifier (new) with 7.5 H.P. electric motor
8. Custom built stand (new) for classifier with catwalks (new)
9. Custom built Short recirculating conveyor (new) 28” wide X 7’ long troughed slider belt
10. Custom built Long recirculating conveyor (new) 30” wide X 33’ long troughed slider belt
11. Custom built 2” Sized material out-feed conveyor (new) 30” wide X 26’ long troughed slider belt
12. Refurbished Custom Built Surge Bin with 7.5 H.P. drag chain conveyor
13. Custom built in-feed conveyor for M-50 Grizzly (new) 36” wide X 30’ long troughed slider belt
14. Completely Refurbished Granutech/Saturn Model M-50 Grizzly with 200 H.P. electric motor
15. Factory built Grizzly stand with (new) custom built catwalks
16. Refurbished vibratory discharge conveyor
17. Cross-belt self-cleaning magnet (new)
18. Custom built stand for magnet (new)
19. Custom built sized material out-feed conveyor (new) 30” wide X 26’ long
20. Custom built stainless steel auger for wire removal (refurbished) 14” dia. X 24’ long
21. Aspiration system (used like new) Bush Hog 15 H.P. Blower and bag house
This complete system will be able to process whole semi-truck tires or passenger tires at around 4-5 tons per hour down to a 1”minus chip. This system will come complete with all the legs, hoppers, and electrical controls needed to complete the system. This system offers one of the most attractive prices available and all the above work has been performed by our experienced service technicians in our shop and much of this system is NEW. This system is still currently setup for you to inspect if you so desired. As part of the price we will include sending two of our service technicians to assist with installation of this system at your location in the USA. CALL Elaine or Richard at660-295-4204 for more information pertaining to this unique onetime offer! We have many pictures of this system as well as a detailed drawing available upon request! We also have a detailed video of the system when we test ran the equipment that we will gladly send you the link to watch it on you-tube. Also we have samples of the rubber that was produced by this system and if you would like to have one we will be glad to get one sent out to you ASAP. This system would work ideally for producing rubber mulch if you added a screen and a few more screw auger conveyors and some drum magnets to the system. This rubber mulch would then be a product that would add a considerable amount to your bottom line profitability.
Whole above system priced at ONLY $495,000.00
When in doubt always give the “can do crew” at URC a call for all your waste tire recycling equipment needs. And don’t hesitate to give us a call for any and all types of other recycling equipment that you might have a need for. We value our customers and treat all of them the way we would want to be treated if we were doing the buying. Call URC, the ones who have been serving this industry now for over twenty years.